To build projects for the Cu you need to install iCEcube2 (bottom of the page). To build projects for the Au you need to install Vivado (WebPACK, aka free). These will give access to the boards to the "dialup" group. If you run into permission problems, you can copy the udev rules files from the driver folder into /etc/udev/rules.d/. The drivers for libusb are generally included with your distribution and things will probably just work. If you are using a Mojo, you need to install the serial port drivers by running the file named dpinst-amd64.exe which can be found where you installed Alchitry Labs or in the Windows files (not the installer). In the dialog that pops up, make sure "Delete the driver software for this device" is checked and click "Uninstall." Repeat this for the second entry. Right click on one of them and choose "Uninstall device." Here you should see two entries for your board. To do this, open the Device Manager (with your board plugged in) and scroll down to "Universal Serial Bus devices." If you were using a previous version of Alchitry Labs, you can now remove winUSB. Windows should automatically detect and load the proper drivers for your board. You no longer need to install any drivers manually for Alchitry boards (see the next section for the Mojo). This has the advantage of no longer needing to specify a serial port for your board and you no longer need to install any drivers for the Alchitry boards on Windows or Linux! Windows DriversĪlchitry Labs now supports both the open source library libusb, the FTDI proprietary drivers, and direct COM port drivers (for the Mojo). bin files directly to your board from a third-party tool. Alchitry Labs now includes the Alchitry Loader as part of the install to make things simpler.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |